All The Hearts - Perfect Combination Crystals Kit
You have just about everything in this Kit! And this is a great Starter & Beginner Kit.
Kit Only Option
All 20 Crystals Heart Colors and SS3-SS16 Filler sizes you need
All The Center-Pieces with Compatible Colors
All The Metal Charms and Frames to Compliment your Design
Total Over 8000+ Crystals!
Kit +Tools Option
All 20 Crystals Colors and sizes you need
All The Center-Pieces with Compatible Colors
All The Metal Charms and Frames to Compliment your Design
Total Over 8000+ Crystals!
iHold Condensed Glue Gel 15g
Twin Tips Brush
Crystals Picker
💎 Step-by-Step Application Guide using Crystals Trifecta :
Step 1: Base Layer Setup
After applying and curing two coats of gel polish, use the Glitz Twin Tip Brush to apply a layer of iHold Condensed Glue Gel where you want to place your crystals. Do not cure.
Next, float a layer of iHold No Wipe Top Coat (or Matte Top Coat) directly over the Glue Gel. Again, do not cure.
Step 2: Place the Crystals/Metal Charms
Use the Glitz Crystal Picker to place your crystals/Metal Charms on the uncured layers. Adjust the placement using the other end of the picker. Once you're happy with the positioning, gently wipe the sides of the nails to maintain a clean shape. Then, cure for 60 seconds under an LED lamp.
Step 3: Secure the Crystals and Metal Charms
Using the needle tip of the iHold Precision Glue Gel, apply a small amount of gel around and between the crystals or metal charms—focusing on the edges for maximum hold. For larger metal charms, use the brush end of the applicator to add an extra layer of seal if needed. Once applied, cure for 60 seconds under an LED lamp to lock everything in place.
Step 4: Reinforce (Optional but Recommended)
Repeat Step 3 for extra hold, especially around larger or 3D crystals.
Important: Never apply top coat or glue directly on top of the crystals—this will dull their shine!
With proper application and wear, Glitz Crystals/Metal Charms can last up to 4 weeks without lifting or falling off.
Step 5: Easy Removal
When you're ready to remove your crystal/Metal Charms designs, simply use crystal remover clipper to remove big crystals/Metal Charms first & soak the nails in professional acetone until the product softens and can be gently removed.
*Crystals Trifecta & Other Accessories Are Not Included.
You have just about everything in this Kit! And this is a great Starter & Beginner Kit.
Kit Only Option
All 20 Crystals Heart Colors and SS3-SS16 Filler sizes you need
All The Center-Pieces with Compatible Colors
All The Metal Charms and Frames to Compliment your Design
Total Over 8000+ Crystals!
Kit +Tools Option
All 20 Crystals Colors and sizes you need
All The Center-Pieces with Compatible Colors
All The Metal Charms and Frames to Compliment your Design
Total Over 8000+ Crystals!
iHold Condensed Glue Gel 15g
Twin Tips Brush
Crystals Picker
💎 Step-by-Step Application Guide using Crystals Trifecta :
Step 1: Base Layer Setup
After applying and curing two coats of gel polish, use the Glitz Twin Tip Brush to apply a layer of iHold Condensed Glue Gel where you want to place your crystals. Do not cure.
Next, float a layer of iHold No Wipe Top Coat (or Matte Top Coat) directly over the Glue Gel. Again, do not cure.
Step 2: Place the Crystals/Metal Charms
Use the Glitz Crystal Picker to place your crystals/Metal Charms on the uncured layers. Adjust the placement using the other end of the picker. Once you're happy with the positioning, gently wipe the sides of the nails to maintain a clean shape. Then, cure for 60 seconds under an LED lamp.
Step 3: Secure the Crystals and Metal Charms
Using the needle tip of the iHold Precision Glue Gel, apply a small amount of gel around and between the crystals or metal charms—focusing on the edges for maximum hold. For larger metal charms, use the brush end of the applicator to add an extra layer of seal if needed. Once applied, cure for 60 seconds under an LED lamp to lock everything in place.
Step 4: Reinforce (Optional but Recommended)
Repeat Step 3 for extra hold, especially around larger or 3D crystals.
Important: Never apply top coat or glue directly on top of the crystals—this will dull their shine!
With proper application and wear, Glitz Crystals/Metal Charms can last up to 4 weeks without lifting or falling off.
Step 5: Easy Removal
When you're ready to remove your crystal/Metal Charms designs, simply use crystal remover clipper to remove big crystals/Metal Charms first & soak the nails in professional acetone until the product softens and can be gently removed.
*Crystals Trifecta & Other Accessories Are Not Included.
You have just about everything in this Kit! And this is a great Starter & Beginner Kit.
Kit Only Option
All 20 Crystals Heart Colors and SS3-SS16 Filler sizes you need
All The Center-Pieces with Compatible Colors
All The Metal Charms and Frames to Compliment your Design
Total Over 8000+ Crystals!
Kit +Tools Option
All 20 Crystals Colors and sizes you need
All The Center-Pieces with Compatible Colors
All The Metal Charms and Frames to Compliment your Design
Total Over 8000+ Crystals!
iHold Condensed Glue Gel 15g
Twin Tips Brush
Crystals Picker
💎 Step-by-Step Application Guide using Crystals Trifecta :
Step 1: Base Layer Setup
After applying and curing two coats of gel polish, use the Glitz Twin Tip Brush to apply a layer of iHold Condensed Glue Gel where you want to place your crystals. Do not cure.
Next, float a layer of iHold No Wipe Top Coat (or Matte Top Coat) directly over the Glue Gel. Again, do not cure.
Step 2: Place the Crystals/Metal Charms
Use the Glitz Crystal Picker to place your crystals/Metal Charms on the uncured layers. Adjust the placement using the other end of the picker. Once you're happy with the positioning, gently wipe the sides of the nails to maintain a clean shape. Then, cure for 60 seconds under an LED lamp.
Step 3: Secure the Crystals and Metal Charms
Using the needle tip of the iHold Precision Glue Gel, apply a small amount of gel around and between the crystals or metal charms—focusing on the edges for maximum hold. For larger metal charms, use the brush end of the applicator to add an extra layer of seal if needed. Once applied, cure for 60 seconds under an LED lamp to lock everything in place.
Step 4: Reinforce (Optional but Recommended)
Repeat Step 3 for extra hold, especially around larger or 3D crystals.
Important: Never apply top coat or glue directly on top of the crystals—this will dull their shine!
With proper application and wear, Glitz Crystals/Metal Charms can last up to 4 weeks without lifting or falling off.
Step 5: Easy Removal
When you're ready to remove your crystal/Metal Charms designs, simply use crystal remover clipper to remove big crystals/Metal Charms first & soak the nails in professional acetone until the product softens and can be gently removed.
*Crystals Trifecta & Other Accessories Are Not Included.
